‹ALARMSMazatrol Assistant
PARAMMachine parameter · BARRIER (BA)
BA59

Spindle forward rotation M-code for tapping cycle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Spindle forward rotation M-code for tapping cycle

 If the command block of G284/G288 (machining G-codes, F30 = 0) or of G84/G88 (turning G-codes, F30 = 1) does not contain spindle forward/reverse rotation M-codes, one of the following M-codes will be output, depending on the status of bit 0 in parameter SU153: BA59 = 3 BA59 = 203 BA60 = 4 BA60 = 204 0 Tapping cycle of turning Tapping cycle of milling Inverse tapping cycle of Inverse tapping cycle of Bit 0 1  If 0 is set in BA59, 3 will be regarded as having been set, and M03 will be output.  If 0 is set in BA60, 4 will be regarded as having been set, and M04 will be output.

Setting
Setting range—
Unit—
Program type—
Takes effect—
Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 91, 586. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →