What is the setting range of Mazak parameter BA6?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA6

Chuck width (for chuck barrier) — No. 2 turning spindle

Q: What does Mazak parameter BA6 do?

BA6 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Chuck width (for chuck barrier) — No. 2 turning spindle. Setting of chuck width of the No. 2 turning spindle Note : For single turning-spindle specifications, this parameter is invalid.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Setting of chuck width of the No. 2 turning spindle Note : For single turning-spindle specifications, this parameter is invalid.

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 89, 575. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →