What is the setting range of Mazak parameter BA63?

0 to 90 (unit: °). A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA63

Holder angle of angle tool holder

Q: What does Mazak parameter BA63 do?

BA63 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Holder angle of angle tool holder. Set the holder angle of the angle tool holder. According to the value set in this parameter, the holder angle is set in HLD.TYPE on the TOOL DATA display. BA63 = 45 (BA63 = 45) (180 – BA63 = 135)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the holder angle of the angle tool holder. According to the value set in this parameter, the holder angle is set in HLD.TYPE on the TOOL DATA display. BA63 = 45 (BA63 = 45) (180 – BA63 = 135)

Setting

Setting range0 to 90

Unit°

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 92, 587. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →