What is the setting range of Mazak parameter BA66?

0 to 99999999. A changed value takes effect: After stop of movement.

PARAMMachine parameter · BARRIER (BA)

BA66

Deceleration area Z

Q: What does Mazak parameter BA66 do?

BA66 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). G37 deceleration area G37 measuring area. Set the deceleration area and measuring area in the G37 command. BA66: Set the distance between the starting point of movement at the measuring rate, and the measuring point. This value will be used when argument R is omitted from the G37 command. BA67: Set the moving distance in measuring feed mode. This value will be used when argument D is omitted from the G37 command.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

G37 deceleration area G37 measuring area

Set the deceleration area and measuring area in the G37 command. BA66: Set the distance between the starting point of movement at the measuring rate, and the measuring point. This value will be used when argument R is omitted from the G37 command. BA67: Set the moving distance in measuring feed mode. This value will be used when argument D is omitted from the G37 command.

Setting

Setting range0 to 99999999

Unit—

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 92, 587. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →