What is the setting range of Mazak parameter BA70?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · BARRIER (BA)

BA70

Distance between the reference points on both turrets

Q: What does Mazak parameter BA70 do?

BA70 is a Machine parameter in the BARRIER group of the MAZATROL SmoothX control (INTEGREX e-670H). Distance between the reference points on both turrets (radius value).  Workpiece zero point: Workpiece edge center  Tool position reference point: Reference point on the turret  Turret clearance: Distance between the reference points on both turrets (radius value)  Workpiece offset: Workpiece zero point – Reference point of reference turret tool position  Tool position: Tool position reference point – Tool nose position

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Distance between the reference points on both turrets (radius value)

 Workpiece zero point: Workpiece edge center  Tool position reference point: Reference point on the turret  Turret clearance: Distance between the reference points on both turrets (radius value)  Workpiece offset: Workpiece zero point – Reference point of reference turret tool position  Tool position: Tool position reference point – Tool nose position <Schematic diagram>

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 92, 588. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →