What does Mazak parameter D105 do?

D105 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). 2 bit settings.

Which bits does Mazak parameter D105 have?

Bit 0: Handling the X-axial coordinates of non-turning TPC relay points Bit 1: Tap high-speed deep-hole cycle menu display/hidden

‹ALARMSMazatrol Assistant

PARAMUser parameter · POINT (D)

D105

POINT bit settings (2 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — D105 is set bit by bit

bit 0
Handling the X-axial coordinates of non-turning TPC relay points
0: Radius value 1: Diameter value
Range 0, 1 · Takes effect: After stop of movement
bit 1
Tap high-speed deep-hole cycle menu display/hidden
Tap high-speed deep-hole cycle menu 0: Hidden 1: Display
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 22, 129. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →