What is the setting range of Mazak parameter D13?

0 to 99 (unit: mm/0.1 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D13

Spot-machining hole diameter (fixed value)

Q: What does Mazak parameter D13 do?

D13 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Spot-machining hole diameter (fixed value). Hole diameter is automatically set during automatic tool development when spot-chamfering is not to be performed. Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP 1 CTR-DR 20. 

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Hole diameter is automatically set during automatic tool development when spot-chamfering is not to be performed. Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP 1 CTR-DR 20. 

Setting

Setting range0 to 99

Unitmm/0.1 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 106. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →