What is the setting range of Mazak parameter D131?

0 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D131

G00 feed-in speed override for deep-hole boring cycle

Q: What does Mazak parameter D131 do?

D131 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). G00 feed-in speed override for deep-hole boring cycle. Sets the override for the G00 feed-in speed to the previous cutting point in pecking during the deep-hole boring cycle. G00 feed rate  D131 / 100 F302 G01 Note : 1. When “0” is set, the override is set to 100%. 2. The D131 setting does not apply to any other G00 than that for the feed-in operation. [Related parameters] F302 : Allowance in rapid feed stop in deep-hole boring cycle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the override for the G00 feed-in speed to the previous cutting point in pecking during the deep-hole boring cycle. G00 feed rate  D131 / 100 F302 G01 Note : 1. When “0” is set, the override is set to 100%. 2. The D131 setting does not apply to any other G00 than that for the feed-in operation. [Related parameters] F302 : Allowance in rapid feed stop in deep-hole boring cycle

Setting

Setting range0 to 100

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 133. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →