What is the setting range of Mazak parameter D15?

0 to 10 (unit: 0.1). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D15

Depth-of-cut setting element for drilling (except AL)

Q: What does Mazak parameter D15 do?

D15 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Depth-of-cut setting element for drilling (ALMINUM). Element used to automatically set the depth-of-cut per drilling operation during automatic tool development HOLE- × D14 : when the material of the stock workpiece is AL HOLE- × D15 : when the material of the stock workpiece is other than

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Depth-of-cut setting element for drilling (ALMINUM)

Element used to automatically set the depth-of-cut per drilling operation during automatic tool development HOLE- × D14 : when the material of the stock workpiece is AL HOLE- × D15 : when the material of the stock workpiece is other than

Setting

Setting range0 to 10

Unit0.1

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 106. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →