What is the setting range of Mazak parameter D20?

0 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D20

Radial depth-of-cut setting element for end milling

Q: What does Mazak parameter D20 do?

D20 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Radial depth-of-cut setting element for end milling. Element used to automatically set the radial depth-of-cut per end milling operation Depth-of-cut = nominal diameter × D20 Depth-of-cut is automatically set according to the value of this parameter when nominal diameter of the end mill is input. Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP PRE-DIA PRE-DEP RGH DEPTH 1 END MILL 20. 40. 10. 30.  0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to automatically set the radial depth-of-cut per end milling operation Depth-of-cut = nominal diameter × D20 Depth-of-cut is automatically set according to the value of this parameter when nominal diameter of the end mill is input. Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP PRE-DIA PRE-DEP RGH DEPTH 1 END MILL 20. 40. 10. 30.  0.

Setting

Setting range0 to 100

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 108. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →