What is the setting range of Mazak parameter D23?

0 to 99 (unit: mm/0.1 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D23

Prehole clearance for end milling

Q: What does Mazak parameter D23 do?

D23 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Prehole clearance for end milling. The excess amount of prehole diameter over nominal diameter that is used to specify whether the Z-axis is to be moved at a rapid feed rate or at a cutting feed rate during true-circle processing with the end mill

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The excess amount of prehole diameter over nominal diameter that is used to specify whether the Z-axis is to be moved at a rapid feed rate or at a cutting feed rate during true-circle processing with the end mill

Setting

Setting range0 to 99

Unitmm/0.1 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 109. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →