What is the setting range of Mazak parameter D25?

0 to 99 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D25

Boring-bar tip relief

Q: What does Mazak parameter D25 do?

D25 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Boring-bar tip relief. The amount of relief provided for the tip of a boring bar to be kept clear of the hole wall after spindle orientation Note : 1. Valid only when the setting for the prehole diameter of the boring (tool sequence) is CYCLE 1. 2. For the relief direction of the tool tip, see the description of bit 3 and bit 4 of I14.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount of relief provided for the tip of a boring bar to be kept clear of the hole wall after spindle orientation Note : 1. Valid only when the setting for the prehole diameter of the boring (tool sequence) is CYCLE 1. 2. For the relief direction of the tool tip, see the description of bit 3 and bit 4 of I14.

Setting

Setting range0 to 99

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 109. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →