What is the setting range of Mazak parameter D33?

0 to 99 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D33

Back-boring tool tip relief

Q: What does Mazak parameter D33 do?

D33 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Back-boring tool tip relief. The amount of relief provided for a back-boring tool tip to be kept clear of the prehole walls as it is being passed through the prehole in the oriented state of the spindle [1] During back-boring [2] During passage Note : For the relief direction of the tool tip, see the description of bit 3 and bit 4 of I14.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount of relief provided for a back-boring tool tip to be kept clear of the prehole walls as it is being passed through the prehole in the oriented state of the spindle [1] During back-boring [2] During passage Note : For the relief direction of the tool tip, see the description of bit 3 and bit 4 of I14.

Setting

Setting range0 to 99

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 111. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →