What is the setting range of Mazak parameter D35?

0 to 999 (unit: 0.01 mm/0.001 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D35

Prehole-drilling diameter setting element for reamer (drilling)

Q: What does Mazak parameter D35 do?

D35 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Prehole-drilling diameter setting element for reamer (drilling). Element used to automatically set the prehole-drilling diameter during automatic tool development of the reamer unit (When the pre-machining process is drilling.) Example : SNo. TOOL NOM- No. HOLE- 1 DRILL 10. 10.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to automatically set the prehole-drilling diameter during automatic tool development of the reamer unit (When the pre-machining process is drilling.) Example : SNo. TOOL NOM- No. HOLE- 1 DRILL 10. 10.

Setting

Setting range0 to 999

Unit0.01 mm/0.001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 112. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →