What is the setting range of Mazak parameter D39?

0 to 999 (unit: 0.01 mm/0.001 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D39

Reamer-prehole diameter setting element for end milling

Q: What does Mazak parameter D39 do?

D39 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Reamer-prehole diameter setting element for boring or end milling. 1. In automatic tool development of the reamer unit, if the pre-machining process is boring: Example : SNo. TOOL NOM- No. HOLE- 1 BOR BAR 10. 10. 2. In automatic tool development of the reamer unit, if the pre-machining process is end milling: Example : SNo. TOOL No. 1 END MILL 15.  (DIA – D39) 2 END MILL 10. 21.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Reamer-prehole diameter setting element for boring or end milling

1. In automatic tool development of the reamer unit, if the pre-machining process is boring: Example : SNo. TOOL NOM- No. HOLE- 1 BOR BAR 10. 10. 2. In automatic tool development of the reamer unit, if the pre-machining process is end milling: Example : SNo. TOOL No. 1 END MILL 15.  (DIA – D39) 2 END MILL 10. 21.

Setting

Setting range0 to 999

Unit0.01 mm/0.001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 113. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →