What is the setting range of Mazak parameter D4?

0 to 99 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

Maximum allowable spot-chamfering hole diameter element

Q: What does Mazak parameter D4 do?

D4 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum allowable spot-chamfering hole diameter element. Element used to set the maximum spot-chamfering hole diameter (d) during automatic tool development d If d > D2 – D4, the chamfering Chamfering

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to set the maximum spot-chamfering hole diameter (d) during automatic tool development d If d > D2 – D4, the chamfering Chamfering

Setting

Setting range0 to 99

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 104. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →