What is the setting range of Mazak parameter D41?

0 to 99 (unit: mm/0.1 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D41

R-point height during point-machining

Q: What does Mazak parameter D41 do?

D41 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). R-point height during point-machining. R-point height of each tool in the point-machining unit Example : Note : For the inversed spot-facing unit or the back-boring unit, this parameter can also be used for setting the clearance amount at the hole bottom. (D1, D42)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

R-point height of each tool in the point-machining unit Example : Note : For the inversed spot-facing unit or the back-boring unit, this parameter can also be used for setting the clearance amount at the hole bottom. (D1, D42)

Setting

Setting range0 to 99

Unitmm/0.1 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 114. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →