What is the setting range of Mazak parameter D43?

0 to 9 (unit: Thread). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D43

Number of incomplete threads in tapping cycle for piped screw

Q: What does Mazak parameter D43 do?

D43 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of incomplete threads in tapping cycle for piped screw. To set number of incomplete threads in tapping cycle for piped screws (PT, PF, PS). In tapping, internal thread is tapped extra for the depth of (D43 × pitch) in the direction of Z. This is also used as an element for automatically determining hole-drilling depth (HOLE-DEP) in the automatic tool development of the tapping unit. Example : SNo. TOOL No. HOLE-DEP 1 DRILL 10. 10. {DEPTH + D11 + (D43 × pitch)} 

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

To set number of incomplete threads in tapping cycle for piped screws (PT, PF, PS). In tapping, internal thread is tapped extra for the depth of (D43 × pitch) in the direction of Z. This is also used as an element for automatically determining hole-drilling depth (HOLE-DEP) in the automatic tool development of the tapping unit. Example : SNo. TOOL No. HOLE-DEP 1 DRILL 10. 10. {DEPTH + D11 + (D43 × pitch)} 

Setting

Setting range0 to 9

UnitThread

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 114. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →