What is the setting range of Mazak parameter D46?

0 to 9999 (unit: 0.01 mm/0.001 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D46

Minimum gradual drilling depth

Q: What does Mazak parameter D46 do?

D46 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum gradual drilling depth. Set the minimum gradual drilling depth. However, if the residual hole depth is smaller than D46, actual drilling depth will be the same as the residual hole depth. (D45)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the minimum gradual drilling depth. However, if the residual hole depth is smaller than D46, actual drilling depth will be the same as the residual hole depth. (D45)

Setting

Setting range0 to 9999

Unit0.01 mm/0.001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 115. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →