What is the setting range of Mazak parameter D47?

0 to 999 (unit: 0.01 mm/0.001 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D47

Reamer-prehole machining overshoot

Q: What does Mazak parameter D47 do?

D47 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Reamer-prehole machining overshoot. Element used to automatically set the hole depth (HOLE-DEP) of drilling, end milling and boring during automatic tool development of the reamer unit For drilling For end milling or boring Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP 1 DRILL 10. 10.  (DEPTH + D47)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to automatically set the hole depth (HOLE-DEP) of drilling, end milling and boring during automatic tool development of the reamer unit For drilling For end milling or boring Example : SNo. TOOL NOM- No. HOLE- HOLE-DEP 1 DRILL 10. 10.  (DEPTH + D47)

Setting

Setting range0 to 999

Unit0.01 mm/0.001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 116. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →