What is the setting range of Mazak parameter D48?

0 to 999 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D48

Feed override for the section to be chamfered in the planetary tapping cycle

Q: What does Mazak parameter D48 do?

D48 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed override for the section to be chamfered in the planetary tapping cycle. Feed override for the section to be chamfered in the planetary tapping cycle Chamfering feed = Pre-hole machining feed in tapping tool sequence × D48/100

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Feed override for the section to be chamfered in the planetary tapping cycle Chamfering feed = Pre-hole machining feed in tapping tool sequence × D48/100

Setting

Setting range0 to 999

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 116. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →