What is the setting range of Mazak parameter D52?

0 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D52

Reduction ratio for the G00-based relief rate during a very-deep-hole drilling cycle

Q: What does Mazak parameter D52 do?

D52 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Reduction ratio for the G00-based relief rate during a very-deep-hole drilling cycle. Set the reduction ratio for the G00-based relief rate during the very-deep-hole drilling in a drilling or turning-drilling unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the reduction ratio for the G00-based relief rate during the very-deep-hole drilling in a drilling or turning-drilling unit.

Setting

Setting range0 to 100

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 20, 117. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →