What does Mazak parameter D55 do?

D55 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Drilling return distance for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle. D (n = 1 to 4) = Cut depth

What is the setting range of Mazak parameter D55?

0 to 9999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMUser parameter · POINT (D)

D55

Drilling return distance for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

D (n = 1 to 4) = Cut depth

Setting

Setting range0 to 9999

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 118. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →