What is the setting range of Mazak parameter D56?

0 to 255 (unit: Revoluitons). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D56

Number of revolutions during dwell at chip ejection position and hole bottom for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle

Q: What does Mazak parameter D56 do?

D56 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of revolutions during dwell at chip ejection position and hole bottom for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle. Set the number of revolutions of the milling spindle during dwell time at the chip ejection position and the hole bottom for the very-deep-hole drilling cycle or the decremental very-deep-hole machining cycle.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the number of revolutions of the milling spindle during dwell time at the chip ejection position and the hole bottom for the very-deep-hole drilling cycle or the decremental very-deep-hole machining cycle.

Setting

Setting range0 to 255

UnitRevoluitons

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 118. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →