What is the setting range of Mazak parameter D57?

0 to 9999. A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D57

Return speed for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle

Q: What does Mazak parameter D57 do?

D57 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Return speed for very-deep-hole drilling cycle/decremental very-deep-hole machining cycle. Set the return speed for the very-deep-hole drilling cycle or the decremental very-deep-hole machining cycle.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the return speed for the very-deep-hole drilling cycle or the decremental very-deep-hole machining cycle.

Setting

Setting range0 to 9999

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 119. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →