What is the setting range of Mazak parameter D60?

0 to 100 (unit: %). A changed value takes effect: After movement stop.

PARAMUser parameter · POINT (D)

D60

Automatic setting ratio of axial cutting feed rate during chamfering

Q: What does Mazak parameter D60 do?

D60 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Automatic setting ratio of axial cutting feed rate during chamfering. Set the ratio between automatic setting value for the feed rate in the axial cutting and that in the radial cutting during chamfering in the point machining.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the ratio between automatic setting value for the feed rate in the axial cutting and that in the radial cutting during chamfering in the point machining.

Setting

Setting range0 to 100

Unit%

Program typeM

Takes effectAfter movement stop

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 120. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →