What is the setting range of Mazak parameter D63?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D63

Smooth chamfering (point machining): overlap amount

Q: What does Mazak parameter D63 do?

D63 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Smooth chamfering (point machining): overlap amount. Set the amount of overlap for smooth chamfering (point machining). Note : If a value greater than one fourth of circumferential length is set, the amount of overlap is clamped to one fourth of circumferential length. Cutting end point Hole profile shape

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the amount of overlap for smooth chamfering (point machining). Note : If a value greater than one fourth of circumferential length is set, the amount of overlap is clamped to one fourth of circumferential length. Cutting end point Hole profile shape

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 120. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →