What is the setting range of Mazak parameter D73-D77?

0 to 1000 (unit: 0.1% (0.1 mm/0.01 in)). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D73-D77

Learning of cutting conditions (DEP-Z range)

Q: What does Mazak parameter D73-D77 do?

D73-D77 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Learning of cutting conditions (DEP-Z range). Specify DEP-Z range for the end mill and the face mill from the learning data of cutting conditions. When learning data on the condition that DEP-Z is in the following range has been stored in the memory, learning is not effectuated again. For a DEP-Z range of the end mill, set a value of “DEPTH/NOM-” (at a unit of 0.1%). 0 to D73 .................. DEP-Z range (for end mill) 1 D73 to D74 .............. DEP-Z range (for end mill) 2 D74 to D75 .............. DEP-Z range (for end mill) 3 For a DEP-Z range of the face mill, set a value of “DEPTH” (at a unit of 0.1 mm or 0.01 in). 0 to D76 .................. DEP-Z range (for face mill) 1 D76 to D77 .............. DEP-Z range (for face mill) 2

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify DEP-Z range for the end mill and the face mill from the learning data of cutting conditions. When learning data on the condition that DEP-Z is in the following range has been stored in the memory, learning is not effectuated again. For a DEP-Z range of the end mill, set a value of “DEPTH/NOM-” (at a unit of 0.1%). 0 to D73 .................. DEP-Z range (for end mill) 1 D73 to D74 .............. DEP-Z range (for end mill) 2 D74 to D75 .............. DEP-Z range (for end mill) 3 For a DEP-Z range of the face mill, set a value of “DEPTH” (at a unit of 0.1 mm or 0.01 in). 0 to D76 .................. DEP-Z range (for face mill) 1 D76 to D77 .............. DEP-Z range (for face mill) 2

Setting

Setting range0 to 1000

Unit0.1% (0.1 mm/0.01 in)

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 121. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →