What is the setting range of Mazak parameter D78-D82?

0 to 1000 (unit: 0.1% (0.1 mm/0.01 in)). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

D78-D82

Learning of cutting conditions (WID-R range)

Q: What does Mazak parameter D78-D82 do?

D78-D82 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Learning of cutting conditions (WID-R range). Specify WID-R range for the boring bar, back boring bar and end mill from the learning data of cutting conditions. When learning data on the condition that WID-R is in the following range has been stored in the memory, learning is not effectuated again. For a WID-R range of the boring bar and back boring bar, set a value of “DEPTH” (at a unit of 0.1 mm/0.01 in). 0 to D78 .................. WID-R range (for boring bar and back boring bar) 1 D78 to D79 .............. WID-R range (for boring bar and back boring bar) 2 For a WID-R range of the end mill, set a value of “DEPTH/NOM-” (at a unit of 0.1%). 0 to D80 .................. WID-R range (for end mill) 1 D80 to D81 .............. WID-R range (for end mill) 2 D81 to D82 .............. WID-R range (for end mill) 3

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify WID-R range for the boring bar, back boring bar and end mill from the learning data of cutting conditions. When learning data on the condition that WID-R is in the following range has been stored in the memory, learning is not effectuated again. For a WID-R range of the boring bar and back boring bar, set a value of “DEPTH” (at a unit of 0.1 mm/0.01 in). 0 to D78 .................. WID-R range (for boring bar and back boring bar) 1 D78 to D79 .............. WID-R range (for boring bar and back boring bar) 2 For a WID-R range of the end mill, set a value of “DEPTH/NOM-” (at a unit of 0.1%). 0 to D80 .................. WID-R range (for end mill) 1 D80 to D81 .............. WID-R range (for end mill) 2 D81 to D82 .............. WID-R range (for end mill) 3

Setting

Setting range0 to 1000

Unit0.1% (0.1 mm/0.01 in)

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 122. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →