What is the setting range of Mazak parameter D8?

0 to 99 (unit: mm/0.1 in). A changed value takes effect: Immediate.

PARAMUser parameter · POINT (D)

Maximum diameter of holes machinable on one drill

Q: What does Mazak parameter D8 do?

D8 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum diameter of holes machinable on one drill. Element used to automatically set the number of drills which are automatically developed according to the hole diameter of the drill unit 2 D8 < DIA  D9 3 D9 < DIA  D10

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to automatically set the number of drills which are automatically developed according to the hole diameter of the drill unit 2 D8 < DIA  D9 3 D9 < DIA  D10

Setting

Setting range0 to 99

Unitmm/0.1 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 19, 105. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →