What does Mazak parameter D91 do?

D91 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter D91?

Binary, eight digits. A changed value takes effect: Immediate.

Which bits does Mazak parameter D91 have?

Bit 0: M04 is output/not output after the tool has dwelled at the hole bottom during a tapping cycle. Bit 1: The tool dwells/does not dwell after M04 has been output at the hole bottom during a tapping cycle. Bit 2: The tool dwells/does not dwell after it has been returned to the R-point during a tapping cycle. Bit 3: If a drill is used in the pre-machining of the centering drill cycle, the R-point height is set to D1 or not. Bit 4: The finishing tool path is shortened/not shortened during a true-circle processing cycle (end milling). Bit 5: The tool path is shortened/not shortened during a true-circle processing cycle (chamfering). Bit 6: If a pre-machining tool sequence is included in the same unit, the R-point height of the drill is set/not set to D1 or D42. Bit 7: The R-point height of the chamfering cutter during the cycle 2 is set to D42 or not. The R-point height of the spot-machining tool during the chamfering cycle (cycle 2) is set to D42 or not. R-point height selection for smooth chamfering (point machining)

‹ALARMSMazatrol Assistant

PARAMUser parameter · POINT (D)

D91

POINT bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — D91 is set bit by bit

bit 0
M04 is output/not output after the tool has dwelled at the hole bottom during a tapping cycle.
Takes effect: Immediate
bit 1
The tool dwells/does not dwell after M04 has been output at the hole bottom during a tapping cycle.
Takes effect: Immediate
bit 2
The tool dwells/does not dwell after it has been returned to the R-point during a tapping cycle.
Takes effect: Immediate
bit 3
If a drill is used in the pre-machining of the centering drill cycle, the R-point height is set to D1 or not.
Takes effect: Immediate
bit 4
The finishing tool path is shortened/not shortened during a true-circle processing cycle (end milling).
Takes effect: Immediate
bit 5
The tool path is shortened/not shortened during a true-circle processing cycle (chamfering).
Takes effect: Immediate
bit 6
If a pre-machining tool sequence is included in the same unit, the R-point height of the drill is set/not set to D1 or D42.
Takes effect: Immediate
bit 7
The R-point height of the chamfering cutter during the cycle 2 is set to D42 or not. The R-point height of the spot-machining tool during the chamfering cycle (cycle 2) is set to D42 or not. R-point height selection for smooth chamfering (point machining)
Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 21, 122. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →