What does Mazak parameter D97 do?

D97 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). 1 bit settings.

Which bits does Mazak parameter D97 have?

Bit 0: Cutting drawing method for circular milling unit on the VIRTUAL MACHINING display

PARAMUser parameter · POINT (D)

D97

POINT bit settings (1 bit)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — D97 is set bit by bit

bit 0
Cutting drawing method for circular milling unit on the VIRTUAL MACHINING display
Select the cutting drawing method for circular milling unit on the VIRTUAL MACHINING display. 0: Detailed drawing (Cutting is drawn according to the specified pitch.) 1: Simple drawing (Cutting is drawn using approximate geometries regardless of the specified pitch. Cutting is performed from the start point to the end point by one single rotation and another rotation at the end point.)
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 22, 128. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →