What does Mazak parameter D98 do?

D98 is a User parameter in the POINT group of the MAZATROL SmoothX control (INTEGREX e-670H). 2 bit settings.

Which bits does Mazak parameter D98 have?

Bit 0: Action to be taken when the number of times pecking has been performed has reached the set maximum count Bit 1: Execution of the INDEX unit when the PRI.No. is set in the MANUAL PROGRAM

‹ALARMSMazatrol Assistant

PARAMUser parameter · POINT (D)

D98

POINT bit settings (2 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — D98 is set bit by bit

bit 0
Action to be taken when the number of times pecking has been performed has reached the set maximum count
Stop with an alarm 1: Invalid (The control moves to the next machining process.) 0: Valid (The alarm 980 MACRO USER ALARM 1 occurs.)
Range 0, 1 · Takes effect: Immediate
bit 1
Execution of the INDEX unit when the PRI.No. is set in the MANUAL PROGRAM
Set if the INDEX unit is executed or not. 0: Not executed (Conventional scheme) 1: Executed
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 22, 128. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →