What does Mazak parameter DNC1 do?

DNC1 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). Type of terminator. 4 One character of your choice 5 Two characters of your choice DNC port selection

What is the setting range of Mazak parameter DNC1?

0 to 5. A changed value takes effect: At I/O startup.

‹ALARMSMazatrol Assistant

PARAMData I/O parameter · DNC (DNC)

DNC1

Type of terminator

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Type of terminator

4 One character of your choice 5 Two characters of your choice DNC port selection

Setting

Setting range0 to 5

Unit—

Program typeE

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 622, 623. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →