What is the setting range of Mazak parameter DNC11?

0 to 255 (unit: Number of times). A changed value takes effect: At I/O startup.

PARAMData I/O parameter · DNC (DNC)

DNC11

Number of NC transmission/reception retries during DNC command message transfer

Q: What does Mazak parameter DNC11 do?

DNC11 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of NC transmission/reception retries during DNC command message transfer. This parameter is used to set the number of times that transmission/reception of command messages is to be repeated in the case that it is not correctly performed. This parameter has almost the same meaning as that of parameters DNC9 and DNC10, except that command messages are interchanged in the case of DNC11 and files are interchanged in the case of DNC9 and DNC10.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used to set the number of times that transmission/reception of command messages is to be repeated in the case that it is not correctly performed. This parameter has almost the same meaning as that of parameters DNC9 and DNC10, except that command messages are interchanged in the case of DNC11 and files are interchanged in the case of DNC9 and DNC10.

Setting

Setting range0 to 255

UnitNumber of times

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 624. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →