What is the setting range of Mazak parameter DNC17?

0 to 255 (unit: 0.01 s). A changed value takes effect: At I/O startup.

PARAMData I/O parameter · DNC (DNC)

DNC17

NC stop time from reception

Q: What does Mazak parameter DNC17 do?

DNC17 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). NC stop time from reception. [For NC transmission] [For NC reception] The NC stop time from reception of The NC stop time from reception @ from the host system to of  or TEXT from the host system transmission of EOT or TEXT HOST HOST @ @ @ @

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

[For NC transmission] [For NC reception] The NC stop time from reception of The NC stop time from reception @ from the host system to of  or TEXT from the host system transmission of EOT or TEXT HOST HOST @ @ @ @

Setting

Setting range0 to 255

Unit0.01 s

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 626. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →