What does Mazak parameter DNC25 do?

DNC25 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). 7 bit settings.

What is the setting range of Mazak parameter DNC25?

Binary, eight digits. A changed value takes effect: At I/O startup.

Which bits does Mazak parameter DNC25 have?

Bit 0: Type of processing to be executed if the tool quantity data within the NC memory mismatches that which has been transferred from the DNC memory Bit 1: — Bit 2: Handling of tool data and tool files in the M PLUS format, valid/invalid Bit 3: — Bit 4: — Bit 5: — Bit 6: —

‹ALARMSMazatrol Assistant

PARAMData I/O parameter · DNC (DNC)

DNC25

DNC bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — DNC25 is set bit by bit

bit 0
Type of processing to be executed if the tool quantity data within the NC memory mismatches that which has been transferred from the DNC memory
Takes effect: At I/O startup
bit 1
—
Takes effect: At I/O startup
bit 2
Handling of tool data and tool files in the M PLUS format, valid/invalid
Takes effect: At I/O startup
bit 3
—
Takes effect: At I/O startup
bit 4
—
Takes effect: At I/O startup
bit 5
—
Takes effect: At I/O startup
bit 6
—
Takes effect: At I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 627. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →