What does Mazak parameter DNC30 do?

DNC30 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool data/tool file message format. Select a tool data/tool file message format. 0: M32 scheme 1: M Plus scheme 2: M640M scheme 3: M640M Pro scheme

What is the setting range of Mazak parameter DNC30?

0 to 3. A changed value takes effect: At I/O startup.

‹ALARMSMazatrol Assistant

PARAMData I/O parameter · DNC (DNC)

DNC30

Tool data/tool file message format

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select a tool data/tool file message format. 0: M32 scheme 1: M Plus scheme 2: M640M scheme 3: M640M Pro scheme

Setting

Setting range0 to 3

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 98, 628. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →