What is the setting range of Mazak parameter DNC5?

0, 1. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · DNC (DNC)

DNC5

DC code parity

Q: What does Mazak parameter DNC5 do?

DNC5 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). DC code parity. This parameter is used to specify whether or not a parity bit is to be assigned to the DC code to be output. Set values Parity Hole-punching pattern of DC3 code

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

DC code parity

This parameter is used to specify whether or not a parity bit is to be assigned to the DC code to be output. Set values Parity Hole-punching pattern of DC3 code

Setting

Setting range0, 1

Unit—

Program typeE

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 623. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →