What is the setting range of Mazak parameter DNC9?

0 to 255 (unit: Number of times). A changed value takes effect: At I/O startup.

PARAMData I/O parameter · DNC (DNC)

DNC9

Number of NC transmission retries during DNC file transfer

Q: What does Mazak parameter DNC9 do?

DNC9 is a Data I/O parameter in the DNC group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of NC transmission retries during DNC file transfer. This parameter is used to set the number of times that the  code or TEXT is to be repeatedly transmitted to a host system in case that the @ code is not sent from the host system within the waiting time which has been set at WAIT TIME. HOST NC repeated up to the number of

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used to set the number of times that the  code or TEXT is to be repeatedly transmitted to a host system in case that the @ code is not sent from the host system within the waiting time which has been set at WAIT TIME. HOST NC repeated up to the number of

Setting

Setting range0 to 255

UnitNumber of times

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 97, 624. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →