What is the setting range of Mazak parameter DPR11?

0 to 3. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · OTHER (IOP/DPR/IDD)

DPR11

Feed section DC code output

Q: What does Mazak parameter DPR11 do?

DPR11 is a Data I/O parameter in the OTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed section DC code output. Select whether or not DC2 and DC4 codes are to be output to the feed sections. Example : 0 Neither DC2 nor DC4 is output. 3 Both DC2 and DC4 are output. Note : This parameter is valid only when the handshaking method is set to DC control (DPR9 is set to 1).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select whether or not DC2 and DC4 codes are to be output to the feed sections. Example : 0 Neither DC2 nor DC4 is output. 3 Both DC2 and DC4 are output. Note : This parameter is valid only when the handshaking method is set to DC control (DPR9 is set to 1).

Setting

Setting range0 to 3

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 637. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →