What is the setting range of Mazak parameter DPR12?

0 to 65535 (unit: 0.1 s). A changed value takes effect: At I/O startup.

PARAMData I/O parameter · OTHER (IOP/DPR/IDD)

DPR12

Waiting time

Q: What does Mazak parameter DPR12 do?

DPR12 is a Data I/O parameter in the OTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Waiting time. The waiting time for replies from the connected device during inputting or outputting. An alarm occurs if this time elapses following the final reply.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Waiting time

The waiting time for replies from the connected device during inputting or outputting. An alarm occurs if this time elapses following the final reply.

Setting

Setting range0 to 65535

Unit0.1 s

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 637. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →