What does Mazak parameter DPR2 do?

DPR2 is a Data I/O parameter in the OTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Stop bit 1 1.5 2. Number of stop bits (parameter for RS-232C interface initialization)

What is the setting range of Mazak parameter DPR2?

0 to 2. A changed value takes effect: At I/O startup.

‹ALARMSMazatrol Assistant

PARAMData I/O parameter · OTHER (IOP/DPR/IDD)

DPR2

Stop bit

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Stop bit 1 1.5 2

Number of stop bits (parameter for RS-232C interface initialization)

Setting

Setting range0 to 2

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 635. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →