PARAMData I/O parameter · OTHER (IOP/DPR/IDD)
DPR8
ISO code CR output and the output file size
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
ISO code CR output and the output file size
This parameter specifies whether “CR” is to be inserted at the beginning of LF (block delimiter) in ISO code output when the output destination is a serial port (DPR14 = 2 or 3). 0: No “CR” insertion 1: “CR” insertion This parameter specifies the maximum permissible file size to be used for hard disk output using an external output command macro when the output destination is the hard disk (DPR14 = 4). Maximum permissible file size: Entered value × 100K bytes However, this file size is 100K bytes if the entered value is 0.
Setting
Setting range0 to 255
Unit—
Program typeM, E
Takes effectAt I/O startup
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 636. Reference and explanation only — not a reproduction of the manual.