What is the setting range of Mazak parameter DPR9?

0 to 2. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · OTHER (IOP/DPR/IDD)

DPR9

Method of handshaking

Q: What does Mazak parameter DPR9 do?

DPR9 is a Data I/O parameter in the OTHER group of the MAZATROL SmoothX control (INTEGREX e-670H). Method of handshaking. This parameter is used to select the method of handshaking to control the state of data transfer between the NC system and connected device. Set values Method Description 0 None No control 1 DC control Complies with control code DC1 through DC4 2 RTS/CTS Complies with device connection RTS/CTS.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used to select the method of handshaking to control the state of data transfer between the NC system and connected device. Set values Method Description 0 None No control 1 DC control Complies with control code DC1 through DC4 2 RTS/CTS Complies with device connection RTS/CTS.

Setting

Setting range0 to 2

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 636. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →