What is the setting range of Mazak parameter E1?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

Closed-pattern cutting start point and escape point setting element

Q: What does Mazak parameter E1 do?

E1 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Closed-pattern cutting start point and escape point setting element. Element used to set cutting start point and escape point for closed-pattern line- or face-machining Example : Defined closed pattern Defined closed [Applicable units]  LINE OUT, LINE IN, CHMF OUT and CHMF IN  Wall finishing of STEP, POCKET, PCKT MT and PCKT VLY

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to set cutting start point and escape point for closed-pattern line- or face-machining Example : Defined closed pattern Defined closed [Applicable units]  LINE OUT, LINE IN, CHMF OUT and CHMF IN  Wall finishing of STEP, POCKET, PCKT MT and PCKT VLY

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 135. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →