What is the setting range of Mazak parameter E10?

0 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E10

Depth-of-cut-R automatic setting element (Face milling, End milling-top, End milling-step)

Q: What does Mazak parameter E10 do?

E10 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Depth-of-cut-R automatic setting element (Face milling, End milling-top, End milling-step). Element used to automatically set the radial depth-of-cut (WID-R) of the tool sequence in FCE MILL, TOP EMIL or STEP unit WID-R = Example : SNo. TOOL NOM- No. APRCH-X APRCH-Y TYPE ZFD DEP-Z WID-R R1 FCE MILL 100A ? ? XBI  1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to automatically set the radial depth-of-cut (WID-R) of the tool sequence in FCE MILL, TOP EMIL or STEP unit WID-R = Example : SNo. TOOL NOM- No. APRCH-X APRCH-Y TYPE ZFD DEP-Z WID-R R1 FCE MILL 100A ? ? XBI  1.

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 137. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →