LINE/FACE/3D bit settings (8 bits)

1. bit 0

   B-axis user-defined angle setting during C-axis central line machining

   0: Specifiable 1: Not specifiable

   Range 0, 1 · Takes effect: Immediate

2. bit 1

   Machining shape specification method in line machining in ZC mode/on C-axis

   Select the surface on which to describe a line machining shape with a Z-axis offset in the ZC mode. 0: Surface defined by SHIFT-R 1: Surface defined by SHIFT-R + SRV-A Select the surface on which to describe a C-axis line machining of the WPC workpiece scheme. 0: Surface defined by “Cylinder radius” 1: Surface defined by “Cylinder radius” + “Allowance Z value”

   Takes effect: Immediate

3. bit 2

   Z-axis sign inversion at ZC/ZY during line/face machining on the MULTIPLEX HD2 side

   0: Invalid 1: Valid (compatible with M640T)

   Range 0, 1 · Takes effect: Immediate

4. bit 3

   M640T compatible operation selection on the MULTIPLEX HD2 side

   0: Invalid 1: Valid (compatible with M640T)

   Range 0, 1 · Takes effect: Immediate

5. bit 4

   CW direction selection during line/face machining in the composite program on the MULTIPLEX HD2 side (engraving unit excluded)

   0: CW direction of the machining shape that is opposite to the machining direction on the HD1 side 1: CW direction of the machining shape that is the same as the machining direction on the HD1 side (Valid only when bit 3 of parameter E105 is set to 1)

   Range 0, 1 · Takes effect: Immediate

6. bit 5

   C-axis angle selection during Y-axis milling on the MULTIPLEX HD2 side

   0: C-axis angle in the opposite direction to the machining direction on the HD1 side during the following:  Point machining in the ZY mode on the HD2 side; Engraving unit in the ZY mode on the HD2 side;   Point machining in the XY mode on the HD2 side;  Line/face machining in the XY mode on the HD2 side 1: C-axis angle same as the machining direction on the HD1 side during the following:  Point machining in the ZY mode on the HD2 side;  Engraving unit in the ZY mode on the HD2 side;  Point machining in the XY mode on the HD2 side;  Line/face machining in the XY mode on the HD2 side (Valid only when bit 3 of parameter E105 is set to 1)

   Range 0, 1 · Takes effect: Immediate

7. bit 6

   Reference plane for the chamfering program of the LINE RGT/LINE LFT/LINE IN unit in the ZC mode line machining (cylindrical surface)

   Select the reference plane for the program when developing chamfering tools in the LINE RGT/LINE LFT/LINE IN unit in the ZC mode line machining (cylindrical surface) from the following: 0: Cylinder radius + Allowance Z value 1: Cylinder radius

   Range 0, 1 · Takes effect: Immediate

8. bit 7

   Operation when tool path generation using WID-R specified for pocket milling fails

   Sets the operation when tool path generation using WID-R specified for pocket milling fails. 0: Generating the alarm 709 CHECK DEPTH-R 1: Generating a tool path using the tool radius Note : If this parameter is set to 1, the tool path is generated using the tool radius instead of WID-R specified in the program, if tool generation using WID-R fails, the machined shape does not conform to that specified in the program.

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 26, 162, 163. Reference and explanation only — not a reproduction of the manual.