What does Mazak parameter E108 do?

E108 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 4 bit settings.

Which bits does Mazak parameter E108 have?

Bit 0: Display of a warning message when a corner radius is automatically inserted to a shape during intelligent pocket milling (IPM) path creation Bit 1: Display of a warning message when an uncut residue remains due to nose R during intelligent pocket milling (IPM) path creation Bit 4: Execution of a full-circle path movement after helical approach in intelligent pocket milling (IPM) machining Bit 5: Operation on failure of tool entry during intelligent pocket milling (IPM)

‹ALARMSMazatrol Assistant

PARAMUser parameter · LINE/FACE/3D (E)

E108

LINE/FACE/3D bit settings (4 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — E108 is set bit by bit

bit 0
Display of a warning message when a corner radius is automatically inserted to a shape during intelligent pocket milling (IPM) path creation
Display of a warning message when a corner radius is automatically inserted to a shape during intelligent pocket milling (IPM) path creation 0: Not displayed 1: Displayed
Takes effect: Immediate
bit 1
Display of a warning message when an uncut residue remains due to nose R during intelligent pocket milling (IPM) path creation
Display of a warning message when an uncut residue remains due to nose R during intelligent pocket milling (IPM) path creation 0: Not displayed 1: Displayed
Range 0, 1 · Takes effect: Immediate
bit 4
Execution of a full-circle path movement after helical approach in intelligent pocket milling (IPM) machining
Execution of a full-circle path movement after helical approach in intelligent pocket milling (IPM) machining 0: Executed 1: Not executed
Range 0, 1 · Takes effect: Immediate
bit 5
Operation on failure of tool entry during intelligent pocket milling (IPM)
If two geometries are too close to each other and the tool cannot enter while executing intelligent pocket milling (IPM); 0: Generates an alarm 706 ILLEGAL FIGURE DATA and continues operation. 1: Generates an alarm 704 TOOL INTERFERENCE and stops operation.
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 164, 165. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →