What is the setting range of Mazak parameter E109?

0 to 99999 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E109

Allowable limits of engage angle in intelligent pocket milling (IPM) machining

Q: What does Mazak parameter E109 do?

E109 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowable limits of engage angle in intelligent pocket milling (IPM) machining. Set the maximum difference in the radius between the start and end points of the circular arc path The circular arc path is divided if this value is exceeded. Engage angle specified by depth-of-cut-R

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the maximum difference in the radius between the start and end points of the circular arc path The circular arc path is divided if this value is exceeded. Engage angle specified by depth-of-cut-R

Setting

Setting range0 to 99999

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 165. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →